Home >
NEWS >
When installing the light steel keel ceiling, you will encounter the problem of installing the panel
When installing the light steel keel ceiling, you will encounter the problem of installing the panel
When we install the light steel keel dark keel ceiling, we will encounter the problem of installing the panel. We need to seal the keel in the shed, so that the secondary keel cannot be seen on the surface of the ceiling. This ceiling will be more beautiful. But for the ceiling with clear keel, it is different. When installing the ceiling with clear keel, we need to expose the keel under the cover panel, so that we can see the secondary keel on the ceiling surface. So this is the installation of light and dark keels. What you can't see is the dark keel, and what you can see is the bright keel.
A very important step in the construction of our light steel keel ceiling is to fix the boom. How to fix it? Now many high-rise buildings are cast-in-place reinforced concrete slab bottoms. We need to reserve 8mm diameter steel reinforced rings at the bottom of the slab. The two-way distance is less than 1200. Reinforcement rings with a diameter of 6mm, and then the upper part of the two-way middle distance is less than 1200 and the upper part of the suspension rod is fixed with the reserved lifting ring at the bottom of the board. After the U light steel main keel CB38* is leveled with a middle distance of less than 1200, it is fixed with the steel suspension rod. Then use H light steel secondary keel LB20*20, with a middle distance of 600mm.
Then for the installation of the light steel keel secondary keel, the secondary keel should be installed near the main keel. The secondary keel spacing is 300~600mm. Generally speaking, the secondary keel is divided into T-type light steel keel, T-type paint keel, T-type aluminum alloy keel and special keel equipped by various strip gusset manufacturers. Building materials are mainly the production of light steel keel and paint keel. When the secondary keel is fixed on the main keel with T-shaped galvanized iron piece connectors, we should pay attention to the two ends of the secondary keel should be placed on the horizontal flange of the L-shaped side keel, and the strip gusset has a special inner corner line as the edge keel. So simply put, the side keel installation is also very important.
Many people think that the elastic line is unnecessary, and sometimes they directly use a ruler to draw the line, but you must know that sometimes the ruler is relatively short and easy to draw obliquely. If it is a professional installation, many of them will directly perform the elastic line. We follow the level of the wall. The keel line uses self-tapping screws to fix the L-shaped galvanized light steel bars on the pre-embedded wooden bricks; if it is a concrete wall (column), it can be fixed with nails, and the spacing between the nails should not be greater than the spacing between the secondary keels of the suspended ceiling. Then there is the installation of the main keel light steel keel ceiling. In fact, each step has an established order. The main keel we install should be hung on the boom, and the distance between the main keels is 900-1000mm. The construction should pay attention to step by step according to the requirements, so as to avoid subsequent problems.
Light steel keel ceiling decoration is a relatively common method in private and public spaces. In the construction of suspended ceilings, we often use light steel keels. Building materials production and sales of light steel keels have been around for 15 years. Our joists are used a lot in suspended ceilings and partition walls. And now it can also produce and process light steel villa skeleton. Interested friends can contact us to get samples or visit our building materials directly. After all, the quality of building materials is still very important. If the quality is not good, various problems will easily occur.
